Benjamin & Sheridan Repair Kit, Fits Some Post-1995 Multi-Pumps w/Cartridge Valve
Repair Kit for CB9 & C9
Repair kit fits these multi-pump guns made after 1995 & they have a compression tube that slides out of the assembly & does not need a special tool (has a cartridge valve & the valve is NOT soldered). It may be necessary to push out the assembly from the front of the tube: Benjamin 397 & 392 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you:
- Remove the screw in front of triggerguard to remove rear part of the stock
- Remove the pins or screws that hold the retention cap at the rear of the receiver
- Remove the guide pin, spring & hammer to reveal the compression tube
- If the brass compression tube comes out in one piece, then this is the kit you need
- If your gun has a rounded square hole with a valve stem sticking up through it, then you need the other repair kit (CR/Repairkit)
Your Price: $15.95
Warning
Airsoft , Air Guns , BlankGuns, PaintBall Guns are NOT toys.
In order to prevent confusion between real firearm and AirSoft guns, all our AirSoft guns comes with orange paint on tip. Removal of this orange tip for sale or transportation is a federal offense in the United States. They are target guns with varying projectiles and accuracies. Must be 18 years or older to purchase. Check local ordinances prior to purchasing. Must wear protective eye wear and use the same safety measures you would with any firearms. Do not brandish the airsoft gun in public and do not alter its coloration or markings. Such an action is dangerous and may be a crime. AirgunStyle.com is not responsible for any property damage or personal injury resulted from inappropriate or unintended use of our products, or inadequate protective equipment or safety measures.