Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve
Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve
Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you:
- Remove the screw in front of triggerguard to remove rear part of the stock
- Remove the pins or screws that hold the retention cap at the rear of the receiver
- Remove the guide pin, spring & hammer to reveal the compression tube
- If the compression tube appears to be brass & is one piece with a pin protruding from it, you'll need the other kit (CR/RepairKitC9) instead of this one
- If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun
Your Price: $27.95
Warning
Airsoft , Air Guns , BlankGuns, PaintBall Guns are NOT toys.
In order to prevent confusion between real firearm and AirSoft guns, all our AirSoft guns comes with orange paint on tip. Removal of this orange tip for sale or transportation is a federal offense in the United States. They are target guns with varying projectiles and accuracies. Must be 18 years or older to purchase. Check local ordinances prior to purchasing. Must wear protective eye wear and use the same safety measures you would with any firearms. Do not brandish the airsoft gun in public and do not alter its coloration or markings. Such an action is dangerous and may be a crime. AirgunStyle.com is not responsible for any property damage or personal injury resulted from inappropriate or unintended use of our products, or inadequate protective equipment or safety measures.